How To Use A Cross Stitch Hoop

You may need to loosen it a little again to get it back over the extra layer. It seems that placing fabric in a hoop is a no brainer but there is a proper approach.

It S Always Sunny In Philadelphia Themed Cross Stitch Hoop

Choosing A Needlecraft Working Frame

The Top 6 Things Needed For Cross Stitch Hannah Hand Makes

Reading a cross stitch chart.

How to use a cross stitch hoop. If you are new to cross stitching select two small trial projects. Using a hoop or frame. Trim the excess fabric on the back around an inch from the edge of the hoop.

Once it is in place tighten up the screw to keep the fabric taut and the hoop in place. Preparing your hoop for a cross stitch project is easy with the following seven steps. Put cross stitch in the hoop.

What is cross stitch. Using floss the same colour as the fabric anchor your thread and either stitch in a circle using running stitch around the excess fabric or stitch it back and forth like a corset as shown in the video. Separate out the hoop you are using to frame your cross stitch.

Stitch one with and one without a hoop. Gently pull the fabric edges to get the fabric taut and flat in the hoop. Start with the inexpensive plastic hand held type to determine whether you like working with one before investing in the more expensive varieties.

Once you master the technique youll be able to concentrate more on your cross stitch project. Place the inner ring of the hoop on a table. Press the outer hoop over the fabric and the inner hoop.

Find the center of your fabric. If you have already been stitching with a hoop try working without one. Your cross stitch may look clean on the surface.

How to frame cross stitch in an embroidery hoop step 1.